| Extract | R Documentation |
Operators acting on vectors, matrices, arrays and lists to extract or replace parts.
x[i] x[i, j, ... , drop = TRUE] x[[i, exact = TRUE]] x[[i, j, ..., exact = TRUE]] x$name getElement(object, name) x[i] <- value x[i, j, ...] <- value x[[i]] <- value x$name <- value
x, object |
object from which to extract element(s) or in which to replace element(s). |
i, j, ... |
indices specifying elements to extract or replace. Indices are
For When indexing arrays by An index value of |
name |
A literal character string or a name (possibly backtick
quoted). For extraction, this is normally (see under
‘Environments’) partially matched to the |
drop |
For matrices and arrays. If |
exact |
Controls possible partial matching of |
value |
typically an array-like R object of a similar class as
|
These operators are generic. You can write methods to handle indexing
of specific classes of objects, see InternalMethods as well as
[.data.frame and [.factor. The
descriptions here apply only to the default methods. Note that
separate methods are required for the replacement functions
[<-, [[<- and $<- for use when indexing occurs on
the assignment side of an expression.
The most important distinction between [, [[ and
$ is that the [ can select more than one element whereas
the other two select a single element.
The default methods work somewhat differently for atomic vectors,
matrices/arrays and for recursive (list-like, see
is.recursive) objects. $ is only valid for
recursive objects (and NULL), and is only discussed in the section below on
recursive objects.
Subsetting (except by an empty index) will drop all attributes except
names, dim and dimnames.
Indexing can occur on the right-hand-side of an expression for
extraction, or on the left-hand-side for replacement. When an index
expression appears on the left side of an assignment (known as
subassignment) then that part of x is set to the value
of the right hand side of the assignment. In this case no partial
matching of character indices is done, and the left-hand-side is
coerced as needed to accept the values. For vectors, the answer will
be of the higher of the types of x and value in the
hierarchy raw < logical < integer < double < complex < character <
list < expression. Attributes are preserved (although names,
dim and dimnames will be adjusted suitably).
Subassignment is done sequentially, so if an index is specified more
than once the latest assigned value for an index will result.
It is an error to apply any of these operators to an object which is not subsettable (e.g., a function).
The usual form of indexing is [. [[ can be used to
select a single element dropping names, whereas
[ keeps them, e.g., in c(abc = 123)[1].
The index object i can be numeric, logical, character or empty.
Indexing by factors is allowed and is equivalent to indexing by the
numeric codes (see factor) and not by the character
values which are printed (for which use [as.character(i)]).
An empty index selects all values: this is most often used to replace
all the entries but keep the attributes.
Matrices and arrays are vectors with a dimension attribute and so all
the vector forms of indexing can be used with a single index. The
result will be an unnamed vector unless x is one-dimensional
when it will be a one-dimensional array.
The most common form of indexing a k-dimensional array is to
specify k indices to [. As for vector indexing, the
indices can be numeric, logical, character, empty or even factor.
And again, indexing by factors is equivalent to indexing by the
numeric codes, see ‘Atomic vectors’ above.
An empty index (a comma separated blank) indicates that all entries in
that dimension are selected.
The argument drop applies to this form of indexing.
A third form of indexing is via a numeric matrix with the one column
for each dimension: each row of the index matrix then selects a single
element of the array, and the result is a vector. Negative indices are
not allowed in the index matrix. NA and zero values are allowed:
rows of an index matrix containing a zero are ignored, whereas rows
containing an NA produce an NA in the result.
Indexing via a character matrix with one column per dimensions is also
supported if the array has dimension names. As with numeric matrix
indexing, each row of the index matrix selects a single element of the
array. Indices are matched against the appropriate dimension names.
NA is allowed and will produce an NA in the result.
Unmatched indices as well as the empty string ("") are not
allowed and will result in an error.
A vector obtained by matrix indexing will be unnamed unless x
is one-dimensional when the row names (if any) will be indexed to
provide names for the result.
Indexing by [ is similar to atomic vectors and selects a list
of the specified element(s).
Both [[ and $ select a single element of the list. The
main difference is that $ does not allow computed indices,
whereas [[ does. x$name is equivalent to
x[["name", exact = FALSE]]. Also, the partial matching
behavior of [[ can be controlled using the exact argument.
getElement(x, name) is a version of x[[name, exact = TRUE]]
which for formally classed (S4) objects returns slot(x, name),
hence providing access to even more general list-like objects.
[ and [[ are sometimes applied to other recursive
objects such as calls and expressions. Pairlists (such
as calls) are coerced to lists for extraction by [, but all
three operators can be used for replacement.
[[ can be applied recursively to lists, so that if the single
index i is a vector of length p, alist[[i]] is
equivalent to alist[[i1]]...[[ip]] providing all but the
final indexing results in a list.
Note that in all three kinds of replacement, a value of NULL
deletes the corresponding item of the list. To set entries to
NULL, you need x[i] <- list(NULL).
When $<- is applied to a NULL x, it first coerces
x to list(). This is what also happens with [[<-
where in R versions less than 4.y.z, a length one value resulted in a
length one (atomic) vector.
Both $ and [[ can be applied to environments. Only
character indices are allowed and no partial matching is done. The
semantics of these operations are those of get(i, env = x,
inherits = FALSE). If no match is found then NULL is
returned. The replacement versions, $<- and [[<-, can
also be used. Again, only character arguments are allowed. The
semantics in this case are those of assign(i, value, env = x,
inherits = FALSE). Such an assignment will either create a new
binding or change the existing binding in x.
When extracting, a numerical, logical or character NA index picks
an unknown element and so returns NA in the corresponding
element of a logical, integer, numeric, complex or character result,
and NULL for a list. (It returns 00 for a raw result.)
When replacing (that is using indexing on the lhs of an
assignment) NA does not select any element to be replaced. As
there is ambiguity as to whether an element of the rhs should
be used or not, this is only allowed if the rhs value is of length one
(so the two interpretations would have the same outcome).
(The documented behaviour of S was that an NA replacement index
‘goes nowhere’ but uses up an element of value:
Becker et al p. 359. However, that has not been true of
other implementations.)
Note that these operations do not match their index arguments in the
standard way: argument names are ignored and positional matching only is
used. So m[j = 2, i = 1] is equivalent to m[2, 1] and
not to m[1, 2].
This may not be true for methods defined for them; for example it is
not true for the data.frame methods described in
[.data.frame which warn if i or j
is named and have undocumented behaviour in that case.
To avoid confusion, do not name index arguments (but drop and
exact must be named).
These operators are also implicit S4 generics, but as primitives, S4
methods will be dispatched only on S4 objects x.
The implicit generics for the $ and $<- operators do not
have name in their signature because the grammar only allows
symbols or string constants for the name argument.
Character indices can in some circumstances be partially matched (see
pmatch) to the names or dimnames of the object being
subsetted (but never for subassignment). Unlike S (Becker et
al p. 358), R never uses partial matching when extracting by
[, and partial matching is not by default used by [[
(see argument exact).
Thus the default behaviour is to use partial matching only when
extracting from recursive objects (except environments) by $.
Even in that case, warnings can be switched on by
options(warnPartialMatchDollar = TRUE).
Neither empty ("") nor NA indices match any names, not
even empty nor missing names. If any object has no names or
appropriate dimnames, they are taken as all "" and so match
nothing.
Becker, R. A., Chambers, J. M. and Wilks, A. R. (1988) The New S Language. Wadsworth & Brooks/Cole.
names for details of matching to names, and
pmatch for partial matching.
list, array, matrix.
[.data.frame and [.factor for the
behaviour when applied to data.frame and factors.
Syntax for operator precedence, and the
‘R Language Definition’ manual about indexing details.
NULL for details of indexing null objects.
x <- 1:12
m <- matrix(1:6, nrow = 2, dimnames = list(c("a", "b"), LETTERS[1:3]))
li <- list(pi = pi, e = exp(1))
x[10] # the tenth element of x
x <- x[-1] # delete the 1st element of x
m[1,] # the first row of matrix m
m[1, , drop = FALSE] # is a 1-row matrix
m[,c(TRUE,FALSE,TRUE)]# logical indexing
m[cbind(c(1,2,1),3:1)]# matrix numeric index
ci <- cbind(c("a", "b", "a"), c("A", "C", "B"))
m[ci] # matrix character index
m <- m[,-1] # delete the first column of m
li[[1]] # the first element of list li
y <- list(1, 2, a = 4, 5)
y[c(3, 4)] # a list containing elements 3 and 4 of y
y$a # the element of y named a
## non-integer indices are truncated:
(i <- 3.999999999) # "4" is printed
(1:5)[i] # 3
## named atomic vectors, compare "[" and "[[" :
nx <- c(Abc = 123, pi = pi)
nx[1] ; nx["pi"] # keeps names, whereas "[[" does not:
nx[[1]] ; nx[["pi"]]
## recursive indexing into lists
z <- list(a = list(b = 9, c = "hello"), d = 1:5)
unlist(z)
z[[c(1, 2)]]
z[[c(1, 2, 1)]] # both "hello"
z[[c("a", "b")]] <- "new"
unlist(z)
## check $ and [[ for environments
e1 <- new.env()
e1$a <- 10
e1[["a"]]
e1[["b"]] <- 20
e1$b
ls(e1)
## partial matching - possibly with warning :
stopifnot(identical(li$p, pi))
op <- options(warnPartialMatchDollar = TRUE)
stopifnot( identical(li$p, pi), #-- a warning
inherits(tryCatch (li$p, warning = identity), "warning"))
## revert the warning option:
if(is.null(op[[1]])) op[[1]] <- FALSE; options(op)
Add the following code to your website.
For more information on customizing the embed code, read Embedding Snippets.
